RV SnapPad® logo
RV SnapPad® logo

All articles

Do SnapPads fall off?Updated a year ago

For your peace of mind, the pads do not fall off; they must be knocked, bumped, or scraped off. During third-party testing, all models of our SnapPads are subject to and must pass something called a "shake test" to see what speeds are required to experience a loss. Rest assured that the speeds necessary to knock the pads off while driving is not allowed on public roadways.

If your rig has experienced the loss of a pad, there are a few reasons why this may have happened:

The first reason is that the original installation was not completely secure, and the metal landing foot was not installed under the rubber lip of the SnapPad. You can check if you have a proper install quite easily by running your finger around the lip of the pad. While you may not be able to see it, you should be able to feel it as being out. In this case, you can retract your jack and attempt to level again to complete the installation. Please also see our installation tips guide article if you encounter any difficulties.

By far, the most common reason for the loss of a pad is when your rig experiences bumpy or uneven ground, large and small potholes, high curbs, and of course, speed bumps. All of these areas can cause the landing foot and pad to come into contact with the ground. This bottoming out can damage your pad and scrape it off. When navigating this terrain, please exercise caution, and use parking lot-type speeds to protect your pads and jacks.

Was this article helpful?
Yes
No