*Please note that this is not an exhaustive list and only includes models which we have previously encountered. Please use our "Submit Your Rig" form or contact customer service at [email protected] for a personal recommendation for your rig.

Winnebago is one of the biggest RV manufacturers in the world. They are also one of the most complicated when it comes to their leveling system configurations, as they tend to be inconsistent and unpredictable. Not only does Winnebago make a wide range of RV types with different leveling needs, but they tend to frequently change the kind of leveling systems they install on their rigs. In fact, a specific Winnebago model can have more than one kind of standard leveling system, sometimes even within the same year. This is why you won’t find Winnebagos listed in our search tool.

If you own a Winnebago it is imperative that you take the time to measure your jack feet and confirm your individual leveling system for your rig.

Nevertheless, here are some general guidelines for what to look for in your Winnebago when purchasing SnapPads:

Class A

To start, please look at your rig's control panel to see which leveling system your particular rig uses, the name will be printed there. The only way to determine what is on your specific rig is to do a visual inspection and measurement.

For Winnebago’s various Class A models, we have observed at least six different leveling systems/configurations. We can break these down into two categories: 4-packs of all the same size and shape feet versus mixed packs featuring two pairs of different size/shape feet. We have found three different configurations within each category.

4-packs:

If your Class-A Winnebago has four feet that are all the same size and shape, then it is likely that you have one of these three leveling systems (click the link in the brackets to find the related SnapPad package):

• Lippert® 4-point system with 9” round jacks (XTRA 4-pack)**
• Power Gear® or Kwikee Level Best® 4-point system with deep 10” round jacks (Prime 4-pack)
• HWH® 4-point system with 8” round jacks (HiWay 8 4-pack) 

Mixed packs:

Some of the larger Winnebago Class A Motorhomes will have a mix of two different foot sizes, typically with the larger jacks appearing on the rear of the RV. If your rig has a mixed system configuration, it is likely one of these  (click the link in the brackets to find the related SnapPad package):

• Lippert 4-point leveling system with two 9” round jacks and two 12” round jacks (XTRA XL Plus 4-pack)**
• HWH 4-point leveling system with two 10” round jacks and two 12” round jacks (HiWay 10 Bus 4-pack)

(Not sure how to check or measure your RV leveling system? Please read this article on some helpful tips)

**Please note that our XTRA pads are specifically made to fit flat landing feet (please see photos below), they will likely not work if your landing feet are bent or have become "dished." Prior to placing your order please visually inspect all of your landing feet to ensure they are flat. If you are unsure please feel free to send us a photo.

LCI/Lippert®

If you have an LCI/Lippert® with four 9" round jack feet our XTRA 4-pack pads are the right choice for you!

Some of the Winnebago models with LCI/Lippert® leveling that we have encountered that work with our XTRA 4-pack pads includes:

• Adventurer 27N, 29B, 30T, 35F, 36Z, 37F, 38Q 2013 to present models
• Brave 26A, 27B, 31C 2015 and 2016 models
• Forza 34T, 36G, 36H, 38F, 38R, 38W 2014 to present models
• Intent 26M, 28Y, 29L, 30R, 31B, 31P 2018 to 2021 models
• Itasca Meridian 34B, 36M, 40R, 40U 2013 to 2015 models
• Itasca Solei 34T, 38R 2014 and 2015 models
• Itasca Suncruiser 32H, 35P, 37F, 38Q 2013 to 2015 models
• Itasca Sunova 30A, 33C, 35G, 36Z 2013 to 2016 models
• Itasca Sunstar 26HE, 27N, 30T, 31B, 31BE, 35B, 35F, 36Y 2013 to 2016 models
• Itasca Sunstar LX 27N, 35B 2016 models
• Itasca Tribute 26A, 31C 2015 models
• Journey 34B, 36M, 40U 2013 to 2015 models
• Sightseer 33C, 35G, 36Z 2013 to 2016 models
• Vista 26HE, 27N, 27PE, 29N, 29V, 29VE, 30T, 31BE, 35B, 35F, 35U, 36Y 2013 to present models
• Vista LX 27N, 30T, 35F 2016 models

If you have an LCI/Lippert® with two 9" round jack feet and two 12" round jack feet our XTRA XL Plus 4-pack pads are the right choice for you!

• Itasca Ellipse 42HD, 42QD 2015 and 2016 models
• Itasca Meridian 42E 2013 models
• Journey 42E, 42U 2013 to 2015 models
• Tour 42GD, 42QD 2013 to 2015 models

Power Gear®

If you have a Winnebago with a Power Gear® or Kwikee Level Best® leveling system with four 10" round jack feet our PRIME 4-pack pads are the right choice for you!

Here's a list of some of the Winnebago models with Power Gear® leveling that we have encountered that work with our PRIME pads:

• Adventurer 27N, 30T, 31T, 32H, 33C, 35F, 35P, 35Z, 37GL, 38Q 2010 to 2019 models
• Destination 37G, 39W 2008 to 2009 models
• Forza 34T, 35T, 36G, 38F, 38R, 38W 2016 to 2020 models
• Horizon 40A, 42Q 2019 to 2020 models
• Itasca Ellipse 42QD 2012 models
• Itasca Horizon 40A, 42Q 2018 to 2020 models
• Itasca Meridian 34Y, 36M, 38P, 40R, 42E 2009 to 2016 models
• Itasca Solei 34T, 36G, 38R 2016 models
• Itasca Suncruiser 35L, 37F 2009 to 2012 models
• Itasca Sunova 30A, 30B, 33C, 36V, 36Z, 37L 2004 to 2018 models
• Itasca Sunrise 33V, 35A 2005 to 2008 models
• Itasca Sunstar 27N, 27PE, 29VE, 31BE, 32YE, 35BH, 35F 2017 to 2019 models
• Itasca Sunstar LX 27N, 29VE, 30T, 35F 2018 to 2020 models
• Journey 34C, 34Y, 36M, 37H, 40J, 40L, 40U, 42E 2008 to 2017 models
• Sightseer 26P, 29R, 30A, 30B, 33C, 33L, 34C, 34M, 35J, 35N, 36V, 36Z 2005 to 2019 models
• Vista 26HE, 26P, 27N, 27PE, 29FL, 29VE, 30B, 30T, 30W,  31BE, 31KE, 32K, 32VE, 32YE, 33S, 35B, 35F, 36Y 2007 to 2019 models
• Vista LX 27N, 30T, 35B, 35F, 36B 2017 to 2019 models
• Voyage 32H, 33V, 35A 2006 to 2008 models

HWH®

If you have a Winnebago with an HWH® leveling system with two 10” round jacks and two 12” round jacks, our HiWay 10 Bus pads are the right choice for you!

Here's a list of some of the Winnebago models with HWH® leveling that we have encountered that work with our HiWay 10 Bus pads:

• Grand Tour 42QL, 42HL, 45RL 2015 to 2017 models
• Itasca Ellipse 36LD, 42QD 2006 to 2016 models

Class C

Winnebago Class C motorhomes also aren't quite as straight forward as some other brands, as depending on the leveling system they work with several different lines of our SnapPads. Please look at your rig's control panel to see which leveling system your particular rig uses, the name will be printed there. Also note that many Winnebago models can have one of several configurations, even within the same model year. The only way to determine what is on your specific rig is to do a visual inspection and measurement.

HWH®

If you have an HWH® leveling system with four 8"round jack feet you will need our HiWay 8 package. Some examples of rigs that we've seen with this configuration are:

• Aspect 27K, 28T, 29FL, 30C, 30J 2009 to 2018 models
• Itasca Cambria 27K, 30C, 30J 2012 to 2016 models
• Itasca Navion 24D, 24G, 24J, 24V 2011 to 2019 models
• Minnie Winnie 26T, 31D, 31G, 31K, 32K 2017 to present models
• Spirit 26T, 31C, 31G, 31H, 31K 2009 to present models
• Via 24P 2020 models
• View 24D, 24J, 24L, 24V 2015 to 2021 models

Equalizer®

If you have an Equalizer® leveling system with four 7" square jack feet you will need our EQ Compact package. Some examples of rigs that we've seen with this configuration are:

• Itasca Navion 24B,24D, 24J, 24V, 25V 2020 to present models
• View 24D, 24J, 24V 2020 to present models

Bigfoot®

If you have a Winnebago with a Quadra Manufacturing Bigfoot® leveling system that has four 6" round jack feet our Mini 6 4-pack of pads are the right choice for you!

So far we have only encountered one Winnebago model with this configuration, but there may be more:

• Fuse 2017 models

If you have a Winnebago with a Quadra Manufacturing Bigfoot® leveling system that has four 7" square jack feet our BF 7 pads are the right choice for you!

Here's a list of some of the Winnebago models that work with our BF 7 pads:

• Minnie Winnie 31C 2006 models
• View 24J 2015 models

If you have a Winnebago with a Quadra Manufacturing Bigfoot® leveling system that has four 10" octagonal jack feet our BF 10 pads are the right choice for you!

Here's a list of some of the Winnebago models that work with our BF 10 pads:

• View 2012 and 2017 models

Fifth Wheel

LCI/Lippert®

If you have a Winnebago Fifth Wheel with an LCI/Lippert® leveling system that has 9" round jack feet our XTRA pads are the right choice for you! They are available in 2-, 4-, or 6-packs depending on your needs.

Here's a list of some of the Winnebago models that work with our XTRA pads:

• Destination 36RL, 39FB 2014 to 2017 models
• Latitude 2016 models
• Spyder 29SFW 2020 models
• Voyage 2932RL, 3134RL 2020 and 2021 models

Please note that our XTRA pads are specifically made to fit flat landing feet (please see photos above), they will likely not work if your landing feet are bent or have become "dished." Prior to placing your order please visually inspect all of your landing feet to ensure they are flat. If you are unsure please feel free to send us a photo.

Travel Trailer

LCI/Lippert®

Lippert® PSX1® & PSX2® 4-point stabilizers featuring square jacks between 5 ½” to 5 ⅝" (XTRA Square 5 4-pack)   ***Be sure to take a measurement of one of the front AND rear feet as they can be different!

• Minnie Plus 26RBSS, 27BHSS, 27RLTS 2017 to 2021 models

Lippert® PSX1® & PSX2® 4-point stabilizers featuring square jacks between 5 ¾” to 6" (XTRA Square 6 4-pack)    ***Be sure to take a measurement of one of the front AND rear feet as they can be different!

BAL®

If you have an HWH® leveling system with four 5.5" square jack feet you will need our Mini 5 Square package. Some examples of rigs that we've seen with this configuration are:

• Hike 17DB 2022 models
• Micro Minnie 1708FB, 1800BH,2100BH,2108DS, 2108FSB, 2108TB, 2225RL, 2301BHS, 2306BHS 2020 to present models
• Minnie 2455BHS, 2500FL, 2529RG, 2801BHS 2021 to 2022 models
• Spyder 23FS, 23FB 2020 to 2021 models
• Voyage 2427RB, 2831RB, 3033BH, 3235RL 2020 to present models 

If you have an BAL® leveling system with four 6" round jack feet you will need our Mini 6 package. Some examples of rigs that we've seen with this configuration are:

• Micro Minnie 1808FBS, 2100BH, 2106DS, 2106FBS, 2108DS, 2306BHS 2016 to 2019 models
• Winnie Drop 2015 models

* Please note that these models can have one of several configurations, the only way to determine what is on your specific rig is to do a visual inspection and measurement.

**It is very important on the large coaches that you check for clearance issues under your RV prior to ordering. Please fully retract your rear jacks, put your rig into travel mode and check for clearance issues with tires/cross beams and other undercarriage items prior to ordering. The rear SnapPads for the 11.5" jacks will increase the footprint of the rear jack by 2.25", and we recommend a clearance of at least 2 inches away from undercarriage components for safety.

***Please Note*** Always double check your leveling system and jack feet before ordering SnapPads. Because there is no standard in the industry, we cannot guarantee your rig will be compatible with SnapPads without a visual inspection of your leveling system. Need help? Contact us at [email protected].